Socket Mobile 7 Manuel d'utilisateur télécharger pdf (Page 11)

STEP 2: Charge the Scanner

Use the included AC adapter to charge the Cordless Hand Scanner. The

scanner’s NiMH batteries must be charged for at least 4 hours before the

first use. The Battery Status LED will emit a solid red light while charging,

and turn off when the batteries are fully charged.

WARNING: Do not attempt to charge alkaline batteries —

this may cause alkaline batteries to leak and damage the

CHS.

The red Battery Status LED will not function properly if

standard AAA alkaline batteries are being used.

STEP 3: Uninstall Other Scanning Software

Delete any bar code scanning software you may already have installed on

your Pocket PC. You can uninstall either directly from your Pocket PC, or

indirectly via ActiveSync.

OPTION 1: Uninstall Directly from the Pocket PC

1. Remove any scanning hardware from the Pocket PC.

2. Make sure the bar code scanning software is closed.

3. Tap Start | Settings. Tap on the System tab or Control Panel.

4. Tap on the Remove Programs icon.

5. Select the bar code scanning software, then tap Remove.

6. Tap Yes to confirm removal of the program.

7. Soft reset the Pocket PC by pressing the reset button.

OPTION 2: Uninstall via ActiveSync

1. Make sure the bar code scanning software is closed.

2. Use ActiveSync and a serial/Ethernet/USB cable or cradle to make an

active connection between your Pocket PC and a host PC.

3. On the host PC, open Microsoft ActiveSync.

4. Click Tools | Add/Remove Programs.

5. Select the bar code scanning software and click Remove.

6. In the confirmation screen, click OK.

7. A screen will ask if you also want to remove the software from the host PC.

If desired, click NO to keep a copy of the software on the host PC that

can later be re-installed onto a Pocket PC.

CHAPTER 2: SETUP FOR WINDOWS MOBILE 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 77 78

Pas de commentaire

Socket Mobile 7 Manuel d'utilisateur Page 11